IFU Video

Unboxing

TRIAL INFORMATION

If you are undertaking a trial, you will need to retain the original box you received your product in, the inner packaging and correctly re-box your product.

​

Ensure that all components of the product have been thoroughly cleaned and free of any contaminants before returning at the end of your trial period.

How to Use

Screwing the Legs onto the Platform

Screw the legs onto the 4 threads located on the underside of the platform in a clockwise motion and twist firmly to ensure they are secure.

Attaching the Leg Extensions

The optional leg extensions can be used if required, for an extra 110 mm of height.

​

To attach the blue leg extension onto the leg assembly, screw the open-ended side of the blue leg extension on the threaded end of the leg assembly.

​

Twist in a clockwise motion until it is tight and secure.

​

Once this is complete, proceed to assemble the Retrograde IR Platform leg with extension onto the 4 threads located on the underside of the platform in a clockwise motion. Twist firmly to ensure they are secure.

Attaching the Rear Base to the Legs

Attach the rear base onto the Retrograde IR Platform legs by placing the grooves on the base onto the flat surface of the rear legs. Once the rear base has been correctly positioned, secure by pushing the blue locking clips in on both ends of the base to lock onto the legs.

Inserting the Front Base Under the Mattress

Insert the front base underneath the mattress at a horizontal position, near the patient’s knees. Once it is correctly positioned underneath the mattress, slide it upwards until it is sitting underneath the patient’s upper thigh.

Attaching the Retrograde IR Platform to the Front Lower Base

Place the platform over the patient so the feathered edge is towards the patient’s body.

​

Place the Retrograde IR Platform over the patient and align the legs to the recesses in the front lower base and then lowering in. Once the front base has been correctly positioned, secure by pushing the locking clips in on both ends of the base to lock in the legs.

Adjusting Platform Surface Height

To adjust the height of the Platform, twist the blue collar anti-clockwise to unlock the leg. Push down on the platform to lower the height so the feathered edge is aligned with the femoral access site.

​

If you require the platform to be higher, reduce the force pushing down on the platform surface whilst the legs are unlocked. This will allow for the leg height to increase. 

​

Once the platform is at the preferred height, twist the blue collar clockwise to lock the leg.  This will allow the leg and platform to stay fixed for the remainder of the procedure.

Adjusting the Platform Position

If you require the platform to be closer to the patient for optimum placement to the femoral access site, slide the full IR Platform closer to the patient.

​

​The ideal placement is usually mid way along the patients thigh.

Attaching the IR Platform Extension

To attach the IR Platform Extension, insert the extension onto the end of the platform until it reaches the two indents. Push the two blue locking clips in that are located on either side of the extension to lock it in place. It will now remain secure for the remainder of the procedure.